|
|
| Author |
Message |
Paul88
Active User
Joined: 09 Mar 2008
Posts: 5
|
 Posted: Sun Mar 09, 2008 7:46 pm Post subject: Printing in colour |
 |
|
When printing a waveform using two channels should the print show the channels in the two different colours or will it be in only one colour.
Paul... |
|
| Back to top |
|
 |
Matt Williams
Site Admin
Joined: 12 Feb 2008
Posts: 6
Location: Pico Automotive Department
|
| Posted: Tue Mar 11, 2008 4:05 pm Post subject: |
|
|
Paul, the printout should represent what you see on the screen, are you experiencing something different? If so please let me know.
Regards,
Matt Williams,
Automotive Tech Specialist |
|
| Back to top |
|
|
Paul88
Active User
Joined: 09 Mar 2008
Posts: 5
|
| Posted: Wed Mar 12, 2008 11:14 pm Post subject: |
|
|
Matt
On laptop screen, channel A is blue ( Primary ignition waveform ) Channel B is red ( Primary current waveform ) I then click file and save current waveform. It is saved in two colours, but when I print, both waveforms print in red.....
Paul.. |
|
| Back to top |
|
|
Matt Williams
Site Admin
Joined: 12 Feb 2008
Posts: 6
Location: Pico Automotive Department
|
| Posted: Thu Mar 13, 2008 10:22 am Post subject: |
|
|
Paul,
Can you tell me what version of Picoscope you are using (Help menu & then About), also if you email the saved waveform over I can try printing it myself.
Regards,
Matt |
|
| Back to top |
|
|
Paul88
Active User
Joined: 09 Mar 2008
Posts: 5
|
| Posted: Sun Mar 16, 2008 8:03 pm Post subject: |
|
|
Matt thanks for the assistance, turned out to be a printer fault. Pico performs perfectly.
Thanks Paul.. |
|
| Back to top |
|
|
|
Cart
Email