Pico Technical Support and Discussion Forum

Anthony6035 · Newbie Joined: 29 Nov 2007 Posts: 1

Hi all, I currently doing a project which involves pH measurement. I have a DrDaq data logger which i can connect a pH probe up to. The data logger the conncets with the p.c. through a 25 pin serial port. however I am lookin to connect this to Labview 8.0 on the p.c. and was wondering if this is possible. I was also wondering if anyone has any similar projects like this which uses pH control in a Neutralization tank system.
Thank you for your time
Anthony6035

ziko · Posted: Thu Nov 29, 2007 3:25 pm Post subject:

Hi and thank you for your post.

You can use Labview to drive the DrDaq, please look at the technical reference section for more information under section 3.2.3.

http://www.picotech.com/document/pdf/drdaq044.pdf

There are some programming examples in different languages that can give you an idea of how the functions interact. If you did a custom installation this would be located in:

C:\program files\Pico Technology\Pico Full\Examples

Kind regards