Exporting Data

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
Guest
PostPosted: Wed Nov 21, 2007 4:49 pm    Post subject: Exporting Data Reply with quote
I'm trying to export data from Picoscope 5.15.4, using both the copy as text and save as text options, but in either case I only get one (the first I think) of the three channels recorded output along with the timebase. I have logged on channels A B and D. Please help.
Back to top
PeterF
Site Admin
Site Admin


Joined: 07 Jun 2007
Posts: 101
Location: Cambridgeshire
PostPosted: Thu Nov 22, 2007 12:55 pm    Post subject: Reply with quote
.TXT files for scope windows
Column 1 is the time, usually in microseconds or nanoseconds. Column 2 is the voltage, in either millivolts or volts.

If there is more than one channel, the times and voltages for channel A appear first, then the times and voltages for channel B appear below, and so on. This is because readings for different channels may be collected at different times.

The same format is used when pasting scope data on the clipboard.

It would also be a good idea to upgrade to the latest version of PicoScope5, (R5.18.0), from the download page.
PeterF.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group