ADC-100 measures offset

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
Guest
PostPosted: Tue Oct 23, 2007 3:01 pm    Post subject: ADC-100 measures offset Reply with quote
Hello I have just bought secondhand an ADC-100. The software works well however it sometimes jumps to a minimum voltage level offset when its operating. This is disconcerting and the only way to get to correct operation again is to close the software and restart. I have tried both versions for XP on your website and both do the same. Any ideas or a different (older) version would be helpful
Back to top
ziko
Site Admin
Site Admin


Joined: 01 Dec 2006
Posts: 596
Location: St Neots
PostPosted: Tue Oct 23, 2007 4:48 pm    Post subject: Reply with quote
The ADC100 uses a parallel interface, due to the way the XP works it has problems with some PCs. The ADC100 was designed before in the days when DOS was used. The parallel port adapter may resolve your problem:

http://www.picotech.com/usb_parallel_port.html

This is designed to work on our products and only our products.

Kind regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group