|
|
| Author |
Message |
Guest
|
 Posted: Thu Sep 20, 2007 3:55 pm Post subject: Running Pico software v5.15.6 & v5.17.1 with USB TC-08 |
 |
|
Hi,
I am having considerable problems using a USB TC-08 with versions v5.15.6 7 & v5.17.1 Picolog. My application is using a trailing 9m K-type probe for thermal profiling of a continuous furnace. The PC is enabled with windows XP service pack 2.
Errors include:
i) Offsets (compared to handheld calibrated loggers) of ~300 to 400°C below the actual temperatures.
ii) Stopping during profile runs
iii) Spurious readings between channels
I have used TC-08's many times in conjunction with Picolog software and have never had an issues. This is starting to become a problem as i require decent, stable data to validate new processes.
Does anyone have any suggestions?
Many thanks |
|
| Back to top |
|
 |
picojohn
Site Admin
Joined: 11 Jun 2007
Posts: 344
|
| Posted: Fri Sep 21, 2007 11:02 am Post subject: |
|
|
Hello Guest,
You noted that the system previously worked without problem, therefore, has anything changed at all in your system since then or, did the problem suddenly appear?
Regards
John |
|
| Back to top |
|
|
Guest
|
| Posted: Fri Sep 21, 2007 12:51 pm Post subject: Reply |
|
|
Hi John,
I think what I meant to say was I have use TC-08's before with much older versions of PicoLog on other equipment; not on this particular system.
Is it maybe the PC or the logger?
The background to this particualer issue is; I have tried this on at least 2 different laptops, 2 different USB loggers, 2 different USB connections and different versions of PicoLog.
What do you think?
Carl |
|
| Back to top |
|
|
picojohn
Site Admin
Joined: 11 Jun 2007
Posts: 344
|
| Posted: Tue Sep 25, 2007 8:51 am Post subject: |
|
|
Hi Carl,
The range of problems that you report is diffcult to correlate, therefore, can you send problem example .plw files to me at support@picotech.com so that we may take a look at that.
Regards
John |
|
| Back to top |
|
|
|
Cart
Email