Checking opamps for oscillation.....

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
Guest
PostPosted: Wed Aug 15, 2007 1:34 pm    Post subject: Checking opamps for oscillation..... Reply with quote
I have recently "upgraded" some budget microphone preamplifiers and
swapped the audio opamps which were JRC4558D opamps to
Analog Devices OP275GP

I have heard some people suggest that some opamps may lose stability depending on the circuit they are installed in.

I was wondering if the cheapest handheld PICO oscilloscope would identify
any oscillations within the newly installed I.C.s

Many Thanks.
Back to top
ziko
Site Admin
Site Admin


Joined: 01 Dec 2006
Posts: 606
Location: St Neots
PostPosted: Wed Aug 15, 2007 5:16 pm    Post subject: Reply with quote
Hi and thank you for your email, I do not know to much about these amplifiers and about losing stability. However what I can say is that the 2104 and 2105 have the capability of measuring relatively fast signals. Taking the base model 2104 for example, it has an analogue bandwidth of 10MHz and can sample at up to 50MS/s. so it can measure signals that are in MHz.

Hope this helps.

Kind regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group