|
|
| Author |
Message |
Southern Girl
Newbie
Joined: 15 Aug 2007
Posts: 1
Location: North Carolina
|
 Posted: Wed Aug 15, 2007 1:47 pm Post subject: Thermocouple junction introducing measurement error |
 |
|
I found this information and forum from a Googel search and man am I glad!
"Many measurement errors are caused by unintentional thermocouple junctions. Remember that any junction of two different metals will cause a junction. If you need to increase the length of the leads from your thermocouple, you must use the correct type of thermocouple extension wire (eg type K for type K thermocouples). Using any other type of wire will introduce a thermocouple junction. Any connectors used must be made of the correct thermocouple material and correct polarity must be observed."
The reason for my search was the result of a recent visit by a co-worker to a test lab (which will remain un-named) and he took this photo of their connectors for thermocouples. The connectors resemble those used for stereo speaker wire! (I tried to attach the photo, but it was too big) Not knowing exactly the type of material that is used for the connectors, how do you calculate the measurement error introduced by this setup or is there really some type of TC connectors made like that?
I would appreciate any information anyone has on this matter.
Thanks bunches! |
|
| Back to top |
|
 |
PeterF
Site Admin
Joined: 07 Jun 2007
Posts: 106
Location: Cambridgeshire
|
| Posted: Thu Aug 16, 2007 2:43 pm Post subject: |
|
|
Hi,
Yes, you are absolutely right! There is no way to compensate for random junctions like that. The correct metals must be used or as soon as there is a temperature differential between the junctions, error voltages are generated.
PeterF. |
|
| Back to top |
|
|
|
Cart
Email