Pico Technical Support and Discussion Forum

rpm · Posted: Mon Jul 16, 2007 12:40 pm Post subject: data display in enviromon

I am not getting the temperature data to display in graph but it is there for spreadsheet also the units of one temperature grapgh come up as percentage strange I have selected the temps using the colured line button

Metermaster · User Joined: 15 Jun 2007 Posts: 2 Location: New Zealand

Hi,

It looks like you have a data path problem. Are your *.rdg files etc all in the same folder as the Enviromon executable?

If not, firstly run Enviromon and select Settings, Configuration, General, Directories and delete the data path.

Next close Enviromon right down, then copy all of the files from the directory C:\Program Files\Pico Technology\Enviromon into the same directory that the Enviromon executable is in.

I was able to see your graphs once all files were in the same folder, so I hope it works for you too.

I would need to see your user.psc file to comment on your percentage question but feel free to post this too.

Cheers,

Mark

picojohn · Site Admin Joined: 11 Jun 2007 Posts: 391

Hello rpm,

From going through your data (thanks for that), it is noted that you have two entries for "external temperature" in the 'sensor list'. However, only one of those is configured and, you seem to have selected to display in 'graph', the entry that is not configured (see attached screen shot) and, the one that is configured in 'spreadsheet' view.

It may be worth going through the rest of your EnviroMon setup to ensure that there are no other conflicts or mismatches.

Regards
John