ziko
Site Admin
Joined: 01 Dec 2006
Posts: 586
Location: St Neots
|
 Posted: Fri Mar 14, 2008 2:23 pm Post subject: |
 |
|
Hi the 3206 will not work with the automotive software and as such you will not have any of the saved waveforms or automotive menus.
However it is still an oscilloscope so you can probe any of the sensors if you really know what you are doing.
The 3206 is 8 bits vertical resolution whilst the automotive scopes are 12 bits.
One other thing that the 3206 does not have and that is the +/-50V input, it goes to a maximum of +/-20V. Also the automtive scopes have a little more proetection than standrads scopes we sell.
Hope this helps. |
|
Cart
Email