|
|
| Author |
Message |
Florin
Advanced User
Joined: 09 Oct 2006
Posts: 10
Location: Italy
|
 Posted: Tue Dec 05, 2006 2:19 pm Post subject: adc200.vi, set_timebase routine |
 |
|
Hi,
I have some problems setting the timebase in the adc200.vi example for LabView.
I updated the software for my pico adc212 card using PicoFull_r5_15_6.exe
The set_timebase routine from the adc200.vi exemple has tho following inputs and outputs:
inputs: 0 -for the time interval between readings
0 -for is slow mode
0 - for the timebase
these give me an output of 333 ns, which coresponds to the fastest for an ADC-212/3 (as I found in the pico driver documentation).
The problem is that my real time/sample (it works well with picoscope software) is of the order of microseconds, possibly 333 microseconds (for those input parameters).
My question: Could it be microseconds, instead of ns ?
Regards,
Florin |
|
| Back to top |
|
 |
ziko
Site Admin
Joined: 01 Dec 2006
Posts: 596
Location: St Neots
|
| Posted: Thu Dec 28, 2006 2:00 pm Post subject: |
|
|
Hi and thank you for your post.
Currently we are running a limited service over the Christmas period and as such I cannot answer any programming questions. However we will be operating fully from next week.
Sorry for any inconvenience.
Kind regards |
|
| Back to top |
|
|
Florin
Advanced User
Joined: 09 Oct 2006
Posts: 10
Location: Italy
|
| Posted: Thu Dec 28, 2006 2:19 pm Post subject: solved |
|
|
Hi,
I solved that problem allready, thanks
| ziko wrote: | Hi and thank you for your post.
Currently we are running a limited service over the Christmas period and as such I cannot answer any programming questions. However we will be operating fully from next week.
Sorry for any inconvenience.
Kind regards |
|
|
| Back to top |
|
|
|
Cart
Email