|
|
| Author |
Message |
jpw
Guest
|
 Posted: Fri Aug 11, 2006 1:53 pm Post subject: reading flow/ temperture/ and ph to a data logger |
 |
|
i have to measure flow temperture and ph from our effluent discharge,
i have all these three devices installed but for some unknown reason a coupling divice was not included to transmit this data to a computor to show live reading of all three .
do you have a data logger with a with a programe suitable for windows xp so i can read the measurments live and record every hour.
jim |
|
| Back to top |
|
 |
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Mon Aug 14, 2006 9:11 am Post subject: |
|
|
Hello Jim,
Thank you for your post.
We may well have a suitable device for this. A lot will depend on your sensor outputs. If you can supply this information we will be able to help you further.
What we need:
Output variable-Volts, amps etc
Output range-10v, 4-20mA etc.
Sampling interval
Many thanks.
Best regards,
Michael |
|
| Back to top |
|
|
jpw
Guest
|
| Posted: Tue Sep 12, 2006 4:37 pm Post subject: measuring temperture , ph , and flow |
|
|
by any chance do you have a data logging device that will measure temperture , ph , and flow (via ultra sonic)
a logging unit supplied with all three measuring devices and suitable soft wear? |
|
| Back to top |
|
|
Sarah
Guest
|
| Posted: Wed Sep 13, 2006 12:20 pm Post subject: |
|
|
Hi
Thank you for your post.
Our DrDAQ logger will measure both temperature and pH and has a voltage input too so you could connect another sensor up to this. We do not sell sensors to measure flow but the DrDAQ may be able to support them if they have a suitable output.
http://www.drdaq.com/
Best Regards |
|
| Back to top |
|
|
|
Cart
Email