ADC11/12 with temperature and humidity sensors

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
Guest
PostPosted: Tue Sep 12, 2006 12:30 pm    Post subject: ADC11/12 with temperature and humidity sensors Reply with quote
I’m looking to improve an automatic test device for one of our products. We are measuring air pressure, ozone and some voltages. I selected an ADC11/12 and I like to have the following information:
1 Do you have a temperature and humidity sensor that can be used for the ADC11/12 ? It is only for the environmental data.
2 Does the software support saving to a TXT or CSV file every second and once per ten seconds ?

Many thanks wimb
Back to top
Sarah
Guest
PostPosted: Wed Sep 13, 2006 11:24 am    Post subject: Reply with quote
Hi

Thank you for your post.

We do not have any sensors for temperature or humidity which can directly interface to the ADC-11. Instead I recommend buying the Humidiprobe as this will measure both of these parameters and can be used at the same time as the ADC-11.

Our software does not support the saving options that you mention. You would need to perform this manually or use the repeat immediately function and save as plw files.

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group