|
|
| Author |
Message |
Anders
Guest
|
 Posted: Mon Sep 11, 2006 7:05 am Post subject: High temperature measurement |
 |
|
Hello,
I have a problem with high temperature measurements. I want to measure up to 850 degC, but when the logger reach about 600 degC it stops at that temperature. Have I missed some settings or is the logger out of order?
I am using a TC-08 serial unit, type K thermocouple and the PicoLog program. Checked the thermocouple and it´s ok, also checked other channels but the same problem. |
|
| Back to top |
|
 |
Sarah
Guest
|
| Posted: Wed Sep 13, 2006 10:14 am Post subject: |
|
|
Hi
Thank you for your post.
The TC-08 is definately capable of measuring these temperatures. I would suggest it could be a grounding issue as these can occur at higher temperatures. I recommend to ground the TC-08 directly by connecting the outer casing of the RS232 port direct to ground.
Let me know how you get on with this.
Best Regards |
|
| Back to top |
|
|
Guest
|
| Posted: Wed Sep 13, 2006 10:59 am Post subject: High temperature measurement |
|
|
Hello
I tried that but it didn´t help.
I also downloaded the latest program version, it didn´t help.
Run the laptop on batteri, it didn´t help.
I have looked trough your forum and tried every possible suggestions.
What to do?
Regards |
|
| Back to top |
|
|
Guest
|
| Posted: Wed Sep 13, 2006 11:44 am Post subject: High temperature measurement |
|
|
| Sarah wrote: | Hi
Thank you for your post.
The TC-08 is definately capable of measuring these temperatures. I would suggest it could be a grounding issue as these can occur at higher temperatures. I recommend to ground the TC-08 directly by connecting the outer casing of the RS232 port direct to ground.
Let me know how you get on with this.
Best Regards |
Hello
Pushed the wrong button. It´s still me, Anders, called guest in the last message. |
|
| Back to top |
|
|
|
Cart
Email