|
|
| Author |
Message |
maverick
User
Joined: 28 Jun 2006
Posts: 4
|
 Posted: Mon Jul 17, 2006 8:11 am Post subject: how to record one signal from COM1 with signals from ADC11 |
 |
|
Hi,
I need to integrate a digital signal from COM1 with three signals from ADC11-10, i.e., I need to record those 4 signals at the same time(one from COM1, three from ADC11-10). How it can be done? Could it be done with Picolog?
Thanks.
Best regards,
Maverick |
|
| Back to top |
|
 |
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Tue Jul 18, 2006 10:08 am Post subject: |
|
|
Hello,
PicoLog is not capable of reading signals direct from the COM port. This would have to be done with some kind of custom application. Integrating the ADC11 with this would be easy as we supply drivers for this unit already.
If you have any further questions, please let me know.
Best regards,
Michael |
|
| Back to top |
|
|
maverick
User
Joined: 28 Jun 2006
Posts: 4
|
| Posted: Tue Jul 18, 2006 11:33 am Post subject: custom application to record data from COM1 |
|
|
Hello, Michael
Thank you for your answer. could you give some hints/details about the custom application? Is it possible that a Labview program can record data from ADC11 and COM1 at the same time? Do you have some similar examples that we can refer? Thanks.
Best regards,
Maverick |
|
| Back to top |
|
|
Michael
Guru
Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
|
| Posted: Wed Jul 19, 2006 9:57 am Post subject: |
|
|
Hello,
I am not sure if LabVIEW is capable of reading data direct from the COM port. You will have to check your LabVIEW documentation for this.
As for writing your own program, you can download the drivers and examples from our software download pages.
Please visit: www.picotech.com/software.html
Best regards,
Michael |
|
| Back to top |
|
|
|
Cart
Email