|
|
| Author |
Message |
jon_gregory
User
Joined: 29 Nov 2006
Posts: 2
|
 Posted: Wed Nov 29, 2006 4:51 pm Post subject: ADC 11 and PDAa |
 |
|
Hello, I'd like to use an ADC11 in conjunction with a PDA (eg HP 1950) to log voltage data. The PDA seems to include a USB 1.1 io capability, but is this sufficient to drive eth ADC11 and will the software work in the Microsoft Windows Mobile 5 environment? If not, is there a minimum spec that you would advise?
Cheers |
|
| Back to top |
|
 |
Sarah
Guest
|
| Posted: Fri Dec 01, 2006 10:34 am Post subject: |
|
|
Hi
Thank you for your post.
At present Pico software is not compatible with mobile devices and so the unit will not work. The software will only work with Windows on desktop and laptop computers.
Best Regards |
|
| Back to top |
|
|
jon_gregory
User
Joined: 29 Nov 2006
Posts: 2
|
| Posted: Sat Dec 02, 2006 10:25 am Post subject: |
|
|
Is that because the software won't run in the Windows Mobile environment, or is ot a hardware issue? Some of the PDAs (like the Toshiba e740) have a usb 1.1 host capability - does that provide enough interface for the hardware?
So, would it be a case of the driver not working with the Windows Mobile environment - maybe Linux would be better?
Alternatively, can you suggest a way that I can log data from 2-3 sensors and transmit the data periodically to a PC over a wireless network connection (802.11b or similar).
Cheers
PS - I see that one of the other forum users has connected a mobile device to one of your products: http://www.picotech.com/support/about1304.html but it looks like a fully featured tablet PC |
|
| Back to top |
|
|
Sarah
Guest
|
| Posted: Wed Dec 06, 2006 3:53 pm Post subject: |
|
|
Hi
Thank you for your post.
It is a software issue rather than a hardware one. Therefore it is support that may be included in future software releases. At present however I do not know of any plans to add this functionality.
Best Regards |
|
| Back to top |
|
|
|
Cart
Email