Moving from ADC-212 to PS-3423

 
Post new topic   Reply to topic    Pico Technology Forum Index -> General Software Discussions
Author Message
kenauer
Guest
PostPosted: Fri Aug 26, 2005 2:46 pm    Post subject: Moving from ADC-212 to PS-3423 Reply with quote
We have been using the ADC-212 for a diagnostic product and are wanting to also support the PS3423. We directly connect to the driver software.

The settings we used to collect data on the ADC-212 do not map directly, but we've figured out how to map the differences... we think. However, the data we collect comes back with completely different results. The scale of the values seems hugely different. instead of ranging from 1 to 781 we are getting results ranging from -32767 to 10059.

Perhaps we're missing something in the documentation that tells us how to map these differently. Any pointers?
Back to top
Michael
Guru
Guru


Joined: 07 Jul 2005
Posts: 93
Location: St Neots, Cambridgeshire
PostPosted: Thu Sep 01, 2005 1:34 pm    Post subject: Reply with quote
Please view reply posting in the PicoScope forum.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> General Software Discussions
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group