save on trigger 9 (by pulse length)?

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
Guest
PostPosted: Fri Jul 08, 2005 12:57 pm    Post subject: save on trigger 9 (by pulse length)? Reply with quote
At present I'm using a 212-50 to help me debug some electronics. I've got a pulse, which sometimes is 10 times shorter than it should be. I'm try to look at what else is going on when this occurs. At present I'm triggering on this pulse and saving, coming back after an hour or so of measuring and having to look through each one of the plots to spot this shorter pulse (it occurs maybe once every 1000 or so). Is it/could it be possible to have a save on trigger if pulses are > or < a specified time frame?

Thanks,

Ian
Back to top
Sarah
Guest
PostPosted: Mon Jul 11, 2005 10:46 am    Post subject: Reply with quote
Hi

Thank you for your post.

Unfortunately there is no way of doing this in the software. The trigger modes in Picoscope do not allow you at present to set this function. The only way I can think to achieve what you require is to do as you are currently doing.

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group