graphing using the PLW recorder on a client

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoLog
Author Message
Drdaq user
Guest
PostPosted: Thu Nov 04, 2004 9:23 am    Post subject: graphing using the PLW recorder on a client Reply with quote
Hi,

I'm usinf the DrDaq with two external temperature meters. The unit is on one PC (set up as server) and is tranmitting the data to another PC (client). Starting an running the PLW Recorder (version 5.11.6) on server and client also works fine.

But when I try to create a graph on the client I can not control the vertical axis. It insists on only showing a temperature range from -0,4 to +0,4 ot nothing at all. The graph runs without problems on the server.

What's the problem ?

Kind regards
Jorgen
Back to top
markspencer
Site Admin
Site Admin


Joined: 07 May 2003
Posts: 610

PostPosted: Fri Nov 05, 2004 10:26 am    Post subject: Reply with quote
Hi,

I am sorry to hear that you are experiencing this problem.

When you open Picolog, go to the input channels, by Settings | Input channels. When you have the channel names displayed double click the channel name that is reading -0.4 to +0.4 and then select the Options button, when the channel information is displayed. Place a tick in the check box 'Use Parameter Format' now you can change the maximum and minimum values for the graph.

Best regards,
Back to top
Guest
PostPosted: Sat Nov 06, 2004 10:42 pm    Post subject: Reply with quote
Mark,

Thanks for giving a shot at sthe problem. I've tried to as you say and this alters the chale un the graphs. But
1. all numbers on the scale disapears
2. when it let the cross-hair go over the emty graphs It appears as if the program now want the vertical axis yo point downwards (the lower you are in the graph, the higher the figure that ts read out in the top left hand coner og the graph.

I'm not feeling too mutch down over this problem as is is mostly a hobby project trying to let you great hard- and software work over a wireless link between server and client.

I look forward to read your next suggestion.

Kind regards,
Jorgen Christensen
Back to top
Sarah
Guest
PostPosted: Tue Nov 09, 2004 12:08 pm    Post subject: Reply with quote
Hi

Thank you for your post, I am sorry that this didn't work.

Can you send us a file showing this problem to support@picotech.com so that we can see this for ourselves?

This will help us greatly.

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoLog
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group