storing field data in ADC-212/3

 
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
Author Message
Adam
Guest
PostPosted: Sat Aug 28, 2004 3:38 pm    Post subject: storing field data in ADC-212/3 Reply with quote
Hi

I am considering purchasing ADC-212/3 scope plus rechargable battery pack for recording field vibration data. As previously advised this scope should be able to record an accelerometer signal for 60 secs at a sampling rate of 400 samples/s = 24000 samples.

Is it possible to record (started using external trigger) and store field data in the ADC-212/3 scope without the laptop connected?? I would like to download data to laptop after the field test is complete.

Adam
Back to top
Sarah
Guest
PostPosted: Tue Aug 31, 2004 1:44 pm    Post subject: Reply with quote
Hi Adam

Thank you for your post.

The ADC-212/3, along with all of our ocilloscope units needs to be connected to the PC to log data. It is controlled using the software and therefore cannot operate remotely.

Best regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> Pre-Sales Advice
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group