Data Loggers

Using multiple products on the same PC

It is possible to use more than one converter on a single PC and display all channels with the same copy of PicoLog. For example if you need sixteen channels of temperature measurement, use two eight channel
TC-08s on the same PC. Different products can also be mixed on the same PC, for example a TH-03 could be used at the same time as an ADC-200.

Multiple-converter operation is available only in ‘Real time continuous’ mode. Each converter must have a separate port: you can use either standard serial/parallel ports or our USB adapters

To configure PicoLog to use multiple converters:

  1. Choose File | NewSettings
  2. Check the ‘use multiple converters’ box
  3. Continue the set up process in the normal way
See also KB-215

Article: KB-157
27 Nov 2007

< Data Loggers knowledge base