matthew
Site Admin
Joined: 25 Sep 2002
Posts: 133
Location: Cambridgeshire, UK
|
 Posted: Wed Dec 04, 2002 2:05 pm Post subject: Specific Applications |
 |
|
Hi Virat,
1. What you are proposing here is a highly specific application for profiling the characteristics of a system with a Spectrum / FFT measurement ... because PicoScope is designed as an oscillocope (not a logger), the application you suggest isn't possible to create.
2. Because you are not using a Spectrum / FFT measurement here, profiling is easily performed with PicoLog.
- Measure power by measuring the voltage across a known resistance then use the Settings | Calculated parameters to perform the following equation.
Power = (Voltage x Voltage) / Resistance
- Then setup a second channel to measure the frequency
- You can export the spreadsheet data into Excel for a scatter graph to represent the Power / Frequency profile.
Best Regards, |
|
Cart
Email