ADC16 Trigger setup

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoLog
Author Message
tmcdonagh
Guest
PostPosted: Tue Nov 11, 2003 10:08 pm    Post subject: ADC16 Trigger setup Reply with quote
I would like to set up a trigger event with my ADC16 to collect data for a specified period of time. After the collection period, I would like for the unit to recycle, increment the filename, and wait for another trigger event before collecting data. Is it possible to use the ADC16 to accept a trigger event such as a contact closure?

Thanks,

Tom
Back to top
markspencer
Site Admin
Site Admin


Joined: 07 May 2003
Posts: 610

PostPosted: Wed Nov 12, 2003 11:41 am    Post subject: Reply with quote
Hi,

The ADC-16, is not capable of using triggers as its sample rate is only 1.5Hz, therefore it cannot be used in 'Fast Block' mode which is required for the trigger to be set.

Best regards,
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoLog
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group