|
|
| Author |
Message |
Fira
User
Joined: 04 Apr 2007
Posts: 2
|
 Posted: Wed Apr 04, 2007 7:13 pm Post subject: PicoLog does not recode all data!!!! |
 |
|
I am using a PS3204 on a Dell 3.0GHz Dual core computer with 2GB of RAM, XP windows, to operate PicoLog with 1.5625MHz sampling rate, and number of samples per file is 256000. This make the file duration is 164ms. My run lasts for 48 seconds, which means I should have 292 files. But it is giving me 103 file only. I am losing a huge amount of data. I am using the following setting;
Recording method: Fast Block
Action at the end of run: repeat immediately
Please, can any one provide a solution ASAP? One more thing, does the picolog operate on Linux system? and if yes where can I find the drives?
Fira |
|
| Back to top |
|
 |
ziko
Site Admin
Joined: 01 Dec 2006
Posts: 586
Location: St Neots
|
| Posted: Thu Apr 05, 2007 12:30 pm Post subject: |
|
|
Hi Fira,
I spoke to you on the phone today, as I mentioned in fast block mode and using repeat immediately you will get gaps between each of the blocks. As I said the 3224 and 3424 could do what you are looking for if you write your own software.
Hope this helps.
Last edited by ziko on Tue Apr 10, 2007 1:28 pm; edited 1 time in total |
|
| Back to top |
|
|
Fira
User
Joined: 04 Apr 2007
Posts: 2
|
| Posted: Tue Apr 10, 2007 4:55 am Post subject: |
|
|
Hi Ziko
Thank you for your replay. Since these gapes are unavoidable. Can you please specify their duration, and do they occur in a regular bases or it is randomly. Will you provide technical details about this matter, please? This is really crucial for my master thesis. Thanks again for your help
Regards
Fira |
|
| Back to top |
|
|
Audioguy
Super User
Joined: 09 Aug 2007
Posts: 22
|
| Posted: Wed Feb 06, 2008 12:01 pm Post subject: |
|
|
Will the 3224 intoduce these gaps/loss of information when running in Picoscope or Picolog?
The only way of getting true continuous sampling of, say 30 seconds, would be by writing my own software?
/Peter |
|
| Back to top |
|
|
Audioguy
Super User
Joined: 09 Aug 2007
Posts: 22
|
| Posted: Wed Feb 13, 2008 9:35 am Post subject: |
|
|
No answer to my question?
/Peter |
|
| Back to top |
|
|
ziko
Site Admin
Joined: 01 Dec 2006
Posts: 586
Location: St Neots
|
| Posted: Wed Feb 13, 2008 3:33 pm Post subject: |
|
|
Hi Audio Guy, sorry for the delay.
This depends on the sampling rate that you are looking for. If say it is 1KS/s then you can use PicoLog Recorder no problem, you can use streaming mode.
If you wanted higher samlping rates you can also use Fast Block mode in PicoLog recorder this will capture all the data into buffer memory of the device, so for a timebase of 102us (approx 9.8KS/s) will take 52 seconds.
Please refer to our manual for more information, section 1.3
http://www.picotech.com/document/pdf/plw044.pdf
If you wish to go at an even higher sampling rate up to 1MS/s (depending on your PC spec and overheads) you can write your own software.
Please refer to our user manual and look at the Technical Reference section.
http://www.picotech.com/document/pdf/ps3000044.pdf
Kind regards |
|
| Back to top |
|
|
Audioguy
Super User
Joined: 09 Aug 2007
Posts: 22
|
| Posted: Sat Feb 16, 2008 3:04 pm Post subject: |
|
|
Thanks!
Just trying to understand how to use PS3224 with associated software most effectively and efficiently.
/Peter |
|
| Back to top |
|
|
|
Cart
Email