McLyde
Active User
Joined: 18 May 2006
Posts: 7
Location: Finland
|
 Posted: Fri May 19, 2006 9:47 am Post subject: Fast block mode freezes |
 |
|
I'm using a Picoscope 3206 and I am struggling with the fast block mode (software version 5.3.19). I have the external power connected:
The parameters I have for the fast block mode, are:
Timebase: 20ns and the number of samples: 1M. Only channel A is being used (AC-coupled, +/- 1V). Additionally I have an external trigger.
The problem occurs when the samples are being sent to the computer. Some times I can collect up to 3 files before the program crashes and sometimes it happens after the first 1Msamples have been collected.
Even if I lower the number of collected samples, the problem still presents itself. The only way I've been able to avoid this is to wait 1 second between the samples being collected.
Would it be possible to change the time between consecutive measurements, to faster than 1second? |
|
Cart
Email