|
|
| Author |
Message |
aldo
Guest
|
 Posted: Fri Mar 17, 2006 1:58 pm Post subject: USB speed issues with Picoscope 3206 |
 |
|
I have been using Picoscope 3206 for a while. It works fine, but any time I connect the Picoscope to the PC, it appears the following pop-up message "the device may perform faster if connected to a USB 2.0 port". I tried with several PCs but the warning mssage still appears (the PC includes a USB 2.0 controller!). As a matter of fact, when I try to connect some other USB 2.0 device to the same USB port, the mssage does not appear and the device works properly.
I wonder if my Picoscope is working at the USB 1.1 speed or the USB 2.0 speed!
Thank you very much in advance
Aldo |
|
| Back to top |
|
 |
Autonerdz
Zen Master
Joined: 20 Nov 2002
Posts: 206
Location: Washington State USA
|
| Posted: Fri Mar 17, 2006 5:10 pm Post subject: usb |
|
|
Aldo,
Just ignore the message. It will run at the 2.0 speed. |
|
| Back to top |
|
|
Andrew Simper
Guest
|
| Posted: Sat Mar 18, 2006 7:45 pm Post subject: USB speed issues with Picoscope 3206 |
|
|
Any chance of a fix to the driver so the warning message doesn't pop up? Even though it doesn't matter if you do plug it into a usb2 port, it will matter if you accidentally plug it into a usb1 port. At the very least add something to the scope / logger application that confirms it's a usb2 port (eg in about box or something)
Cheers
Andrew |
|
| Back to top |
|
|
Sarah
Guest
|
| Posted: Fri Mar 24, 2006 12:11 pm Post subject: |
|
|
Hi Andrew
The Help | About box in Picoscope will tell you whether the scope is running at USB 1 or 2 speed.
Best Regards |
|
| Back to top |
|
|
Guest
|
|
| Back to top |
|
|
|
Cart
Email