pico.386 error and ADC100

 
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
Author Message
TBaeck
Newbie


Joined: 04 Jul 2005
Posts: 1

PostPosted: Mon Jul 04, 2005 10:39 am    Post subject: pico.386 error and ADC100 Reply with quote
Dear All,

I have installed the picoscope program for the ADC 100 and the driver software on a windows 2000 SP4 machine. But I still get the same message:

Code:
Cannot find pico.386


I also added the following to the win.ini file

Code:
[ADC100]
UseAdapter=Yes

But I cant get any signal through to the computer. I tried with different parallel cables, I also checked the signal getting through. And they are both fine.
Is there someone who can help me with this problem? Thans in advance.

Cheers,

Thomas Baeck
ISS Technician on The British School of Brussels
Back to top
Sarah
Guest
PostPosted: Tue Jul 05, 2005 8:40 am    Post subject: Reply with quote
Hi

Thank you for your post.

I would recommend loooking at the mode of the parallel port in the BIOS. Some modes are not optimal for the operation of the product. The modes that you should try are:

SPP, Normal, Output Only, Unidirectional.

Not all of these modes will be present. See if this helps with the operation of the unit and let me know how you get on.

Hope this helps

Best Regards
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Pico Technology Forum Index -> PicoScope
All times are GMT
Page 1 of 1

 


Pico Technology topic RSS feed 
Powered by phpBB © 2001, 2005 phpBB Group