CartThe following accessories may be used with the PicoScope 3425 differential oscilloscope and most other modern oscilloscopes.
For test leads and current clamps please visit accessories.picotech.com to see our full range of accessories.
MI007: 60 MHz Oscilloscope Probe x1/x10
This high–quality general purpose oscilloscope probe, has a 60 MHz bandwidth. A two position slide switch allows attenuation of either x1 or x10 to be selected.
| MI007 Oscilloscope Probe Specifications | ||
|---|---|---|
| x1 | x10 | |
| Attenuation | 1:1 | 10:1 |
| Bandwidth | DC to 15 MHz | DC to 60 MHz |
| Rise time: | 23.3 ns | 5.8 ns |
| Input resistance | 1 MΩ | 10 MΩ |
| Input capacitance | 46 pF plus oscilloscope | Approx 15 pF |
| Working voltage | 600 V DC incl Peak AC (derating with frequency) | |
| Cable length | 1.2 M (approx 3 ft 11 in) | |
| Lead time | In stock | |
| Price | £15·00 US$24·75* €18,15* £15·00 US$24·75* €18,15* | |
BNC Attenuator Set
The TA050 attenuator set consists of four coaxial attenuators designed for use with signals up to 1 GHz. Each attenuator has a male and a female BNC connector.
Please note: The TA050 attenuators must be used with a matched 50-ohm source and load. If you wish to attenuate a signal before feeding it into a high-impedance measuring instrument, you must add a 50 ohm feedthrough terminator such as the Pico Technology TA051 feedthrough terminator.
| TA050 Specifications | |
|---|---|
| Bandwidth | DC to 1 GHz |
| Attenuation | 3 dB, 6 dB, 10 dB, 20 dB |
| Maximum power dissipation | 1 W |
| Input impedance | 50 Ω |
| Output impedance | 50 Ω |
| VSWR | 1.5:1 or better |
| Dimensions | 56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in) |
| Connectors | BNC, 1 male + 1 female |
| Construction | Shielded inner box with plastic shell |
| Weight | 24 g (approximately 0.85 oz) each |
| Lead time | In stock |
| Price | £39·00 US$64·35* €47,19* |
Feed-Through Terminator
The TA051 feedthrough attenuator is a coaxial terminator with BNC connectors. It is useful for connecting signals from 50-ohm sources into instruments with high-impedance inputs, such as oscilloscopes.
| TA051 Specifications | |
|---|---|
| Bandwidth | DC to 1 GHz |
| Maximum power dissipation | 1 W |
| Input impedance | 50 Ω |
| Dimensions | 56 x 20 x 17 mm (approximately 2.2 x 0.8 x 0.7 in) |
| Connectors | BNC, 1 male + 1 female |
| Construction | Shielded inner box with plastic shell |
| Weight | 24 g (approximately 0.85 oz) each |
| Lead time | Low stock - order soon |
| Price | £9·50 US$15·67* €11,49* |
* US Dollar and Euro prices are approximate. Your card will be billed in Pounds Sterling (GBP).
Share