ADC-212/50 and ADC-212/100 Specifications

ADC-212/50 ADC-212/100
Channels 2 x BNC + 1 external trigger
Analog bandwidth 25 MHz 50 MHz
Sampling rate
(single channel)		 50 MS/s 100 MS/s
Sampling rate
(dual channel)		 50 MS/s
Sampling rate
(repetitive signals)		 5 GS/s**
Resolution 12 bit
Buffer memory 128 kS
Dynamic range 80 dB
Scope timebases 100 ns/div to 50 s/div
Spectrum ranges 0 to 25 MHz 0 to 50 MHz
Trigger modes Free run, Auto, Repeat & Single
Pre/ post trigger ±100 %
Voltage ranges ±50 mV to ±20 V in nine ranges
Overload protection ±100 V
Input impedance 1 MΩ
Coupling AC, DC
Accuracy ± 1%
Power supply 500 mA @ 12 V (mains adaptor supplied)
Output connector D25 to PC parallel port (cable supplied)
Dimension 140 x 190 x 45 mm   (5.51 x 7.48 x 1.77 in)
Supplied software PicoScope (oscilloscope, spectrum analyser, meter), PicoLog (data logger) and a Software Development Kit.
Software is supplied on CD and is compatible with 32-bit editions of Windows XP and Vista.
Language support (software) PicoLog: Full support for English, French and German; menus only for Italian and Swedish
PicoScope 5: English, French, German, Spanish and Czech
Language support (documentation) User’s guide: English, French
Installation guide: English, French, German, Italian, Spanish, Swedish, Czech, Dutch, Danish

** 5 GS/s equivalent time sampling for repetitive signals is supported by PicoScope R5.08.0 and later, if you have an earlier version please visit the download section of our website for a free upgrade.

ADC-212 No Longer Available

Please note: the ADC-212 is no longer available.
Please view our oscilloscope comparison chart to find a suitable alternative.