PicoScope 2104 and 2105 Handheld Scope Specifications
| Oscilloscope — Vertical | ||
|---|---|---|
| Model | PicoScope 2104 | PicoScope 2105 |
| Bandwidth | 10 MHz | 25 MHz |
| Rise time (calculated) | 35 ns | 14 ns |
| Input channels | 1 | |
| Vertical resolution | 8 bits | |
| Enhanced vertical resolution | 12 bits | |
| DC accuracy | ±3% | |
| Linearity | < 1 LSB at 25 °C | |
| Input characteristics | 1 MΩ in parallel with 20 pF | |
| Input type | Oscilloscope probe | |
| Input coupling | Software selectable AC/DC | |
| Input ranges (full scale) | ±100 mV to ±20 V in 8 ranges | |
| Overload protection | ±50 V (DC+AC peak) | |
| Oscilloscope — Horizontal | ||
|---|---|---|
| Maximum sampling rate (single shot) | 50 MS/s | 100 MS/s |
| Sampling rate (repetitive signals) | 1 GS/s | 2 GS/s |
| Maximum sampling rate (continuous streaming mode) | 1 kS/s (Record length limited to 65 kS in PicoScope, unlimited when using the supplied SDK) | |
| Buffer memory | 8,000 samples | 24,000 samples |
| Waveform buffer | Up to 10,000 waveforms | |
| Timebase ranges | 200 ns/div to 200 s/div (10 ns/div to 200 s/div with ETS) | 100 ns/div to 200 s/div (5 ns/div to 200 s/div with ETS) |
| PC Requirements | ||
|---|---|---|
| Minimum | Processor: Pentium II processor, or equivalent Memory: 64 MiB (XP) / 512 MiB (Vista) / 1 GiB (Win 7) Operating system: 32– or 64–bit edition of Microsoft Windows XP SP2, Vista or Windows 7 Ports: USB 1.1 compliant port | |
| Recommended | Processor: 2 GHz Pentium IV processor, or equivalent Memory: 256 MiB (XP) / 1 GiB (Vista / Win 7) Operating system: 32– or 64–bit edition of Microsoft Windows XP SP2 (or above), Vista or Windows 7 Ports: USB 2.0 compliant port | |
| Environmental | ||
|---|---|---|
| Operating environment Temperature range | 0 °C to 45 °C (20 °C to 30 °C for quoted accuracy) | |
| Physical Properties | ||
|---|---|---|
| Dimensions Probe Probe and Cable Diameter | 220 mm (8.6 in) long 3 m (9.8 ft) long 32 mm (1.2 in) | |
| Software | ||
|---|---|---|
| PicoScope 6 for Windows | PicoScope 6 is your complete test and measurement lab in one application.
Features include: Capture modes: oscilloscope, spectrum and persistence. Channel maths: calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions. Mask limiting testing: pass/fail, failure count, total count. Serial Decoding: decode data from a serial bus such as I²C. Automated measurements Scope mode: AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak–to–peak, rise time and rising rate. Spectrum mode: frequency at peak, amplitude at peak, average amplitude at peak, total power, total harmonic distortion (THD % and THD dB), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD). Export data formats: comma separated values (CSV), tab delimited (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT). Full details for PicoScope 6 | |
| PicoLog for Windows | PicoLog data acquisition software can collect up to 1 million samples. Features include: Multiple views — view data as a graph, spreadsheet or text Parameter scaling — convert raw data into standard engineering units Math functions — use mathematical equations to calculate additional parameters Alarm limits — program an alert if a parameter goes out of a specified range IP networking — transfer measurements via a LAN or over the Internet Full details on PicoLog | |
| Linux drivers | 32–bit and 64–bit | |
| Software development kit | Includes drivers and example code for various programming languages including C, Delphi, Excel, LabVIEW, VEE and Visual Basic. | |
| Language Support | ||
|---|---|---|
| Software PicoLog PicoScope 6 | Full support for English, French and German; menus only for Italian, Spanish and Swedish Full support for: English, Français, Deutsch, Italiano, Español Menus and dialogs only for: 中文 (简体), 正體中文 (繁體), Čeština, Dansk, suomi, Ελληνικά, Magyar, 日本語, Norsk, Polski, Português, română, Русский, Svenska, Türkçe | |
| Documentation User’s guide Programmer’s guide Installation guide | English, Français, Deutsch, Italiano, Español English English, Français, Deutsch, Italiano, Español | |
| General | ||
|---|---|---|
| Data sheet | English | |
| Additional hardware (supplied) | USB 2.0 cable, user manuals, software CD–ROM | |
| PC interface | USB 2.0 (USB 1.1 compatible) | |
| Power requirements | Powered from USB port | |
| Compliance | European EMC and LVD standards FCC Rules Part 15 Class A | |
| Total Satisfaction Guarantee | In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. | |
| Warranty | 5 years | |
| Lead time | In stock | In stock |
| Price | £125·00 US$206·25* €151,25* | £199·00 US$328·35* €240,79* |
* US Dollar and Euro prices are approximate.
Note: quoted specifications apply when using PicoScope 6 software.
Need to know a specification not listed here? — just ask
Cart
Share