DrDAQ Low Cost Educational Data Logger

DrDAQ is a low cost data logger from Pico that simply plugs into the parallel port of any Windows PC.

DrDAQ has built in sensors for light and temperature, and a microphone to record sound. It can also measure voltage and resistance. In addition it has a socket for standard pH electrodes and connectors that allow the use of optional external sensors for measuring temperature, humidity, pressure and more.

Supplied complete with software and cables, the DrDAQ is ideal for classroom science experiments.

  • Very low cost
  • Built in sensors for light, sound (level and waveforms) and temperature
  • Measure pH — just plug in any standard pH electrode
  • Measure voltages and resistances
  • Sockets for external sensors (temperature, humidity etc)
  • Use DrDAQ to capture fast signals (eg sound waveforms)
  • Outputs for control experiments
  • Simply plug in to your PC and measure

Price £79.00   (approx $158.00 (US) / €102.70)      Quantity    

DrDAQ General Specifications
Input Channels 7 Internal, 2 External
Sampling Rate 10 to 15 kS/s (PC dependent)
Overload Protection ±30 V
Digital Outputs 1 TTL (with 1-3 kΩ output impedance), 1 LED
Dimensions 55 x 70 x 20 mm (2.2 x 2.8 x 0.8 inches)
Output Connector 25 Way Male D-type to PC parallel port (cable supplied)
Supplied software PicoScope, PicoLog, and software drivers
DrDAQ External Sensor Specifications
Sensor Range Resolution Accuracy
pH 0 to 14 0.02 pH Calibration dependent
Temperature -10 to +105 °C 0.1 °C (at 25 °C) 0.3 °C (at 25 °C)
Humidity 20% to 90% RH (Non condensing) 0.2% RH ±10%
Reed Switch 0% = closed
100% = open
   
DrDAQ Internal Sensor Specifications
Chanel Range Resolution Accuracy
Sound waveform ±100 0.2 Not calibrated
Sound level 55 to 100 dBA 1 dBA 5 dBA
Voltage 0 to 5 V 5 mV 3% of FSD
Resistance 0 to 1 MΩ 1 kΩ (at 10 kΩ) 2% (at 100 kΩ
Temperature 0 to 70 °C 0.1 °C (at 25 °C) 2 °C (at 25 °C)
Light 0 to 100 0.1 Not calibrated