CartPicoScope 3224
This product has now been discontinued.
Listed here are the final specifications for the PicoScope 3224.
View our USB Oscilloscopes, Data Acquisition and Vehicle Diagnostics products to see our current range of PC–based test and measurement equipment.
| Oscilloscope | |
|---|---|
| Bandwidth | 10 MHz |
| Channels | 2 |
| Vertical resolution | 12 bits |
| Enhanced vertical resolution | 16 bits |
| Dynamic range | 72 dB |
| Accuracy | 1% |
| Input ranges (full scale) | ±20 mV to ±20 V in 10 ranges |
| Input characteristics | 1 MΩ in parallel with 20 pF |
| Input type | Single-ended, BNC connector |
| Input coupling | Software selectable AC/DC |
| Overload protection | ±100 V on single input |
| Maximum sampling rate (single shot) One channel in use Two channels in use | 20 MS/s 10 MS/s |
| Maximum sampling rate (continuous streaming mode) | 1 MS/s (Record length limited to 2 MS in PicoScope, unlimited when using the supplied API) |
| Buffer memory | 512 kS |
| Buffer memory (in streaming mode) | 2 M samples per channel |
| Waveform buffer | Up to 10000 waveforms |
| Timebase ranges | 500 ns/div to 50 s/div in 25 ranges |
| Timebase accuracy | 100 ppm |
| Triggers | |
|---|---|
| Source | Ch A or Ch B |
| Trigger modes | Free run, auto, repeat, single and save to buffer on trigger |
| Advanced triggers | Window trigger, window pulse, dropout trigger, window dropout trigger, variable trigger hysteresis |
| Pre/post trigger | -100% to +100% |
| Spectrum Analyser | |
|---|---|
| Bandwidth | 10 MHz |
| Frequency range | DC to 10 MHz |
| Display modes | Magnitude, peak hold, average |
| Window types | Blackman, Gaussian, triangular, Hamming, Hann, Blackman-Harris, flat-top, rectangular |
| PC Requirements | |
|---|---|
| Minimum | Processor: Pentium II processor, or equivalent Memory: 64 MiB (XP) / 512 MiB (Vista) / 1 GiB (Win 7) minimum Operating system: 32– or 64–bit edition of Microsoft Windows XP SP2, Vista or Windows 7 Ports: USB 2.0 compliant port |
| Recommended | Processor: 2 GHz Pentium IV processor, or equivalent Memory: 256 MiB (XP) / 1 GiB (Vista / Win 7) Operating system: 32– or 64–bit edition of Microsoft Windows XP SP2 (or above), Vista or Windows 7 Ports: USB 2.0 compliant port |
| Environmental | |
|---|---|
| Operating environment Temperature Humidity | +20 °C to +30 °C for quoted accuracy, 0 °C to +70 °C overall. 20 to 90% RH |
| Physical Dimensions | |
|---|---|
| Dimensions | 140 x 190 x 45 mm (5.51 x 7.48 x 1.77 in) |
| Software | ||
|---|---|---|
| PicoScope 6 for Windows | PicoScope 6 is your complete test and measurement lab in one application.
Features include: Capture modes: oscilloscope, spectrum and persistence. Channel maths: calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions. Mask limiting testing: pass/fail, failure count, total count. Serial Decoding: decode data from a serial bus such as I²C. Automated measurements Scope mode: AC RMS, true RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak–to–peak, rise time and rising rate. Spectrum mode: frequency at peak, amplitude at peak, average amplitude at peak, total power, total harmonic distortion (THD % and THD dB), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD). Export data formats: comma separated values (CSV), tab delimited (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT). Full details for PicoScope 6 | |
| PicoLog for Windows | PicoLog data acquisition software can collect up to 1 million samples. Features include: Multiple views — view data as a graph, spreadsheet or text Parameter scaling — convert raw data into standard engineering units Math functions — use mathematical equations to calculate additional parameters Alarm limits — program an alert if a parameter goes out of a specified range IP networking — transfer measurements via a LAN or over the Internet Full details on PicoLog | |
| Linux drivers | 32-bit and 64-bit | |
| Software development kit | A growing collection of drivers and example code for various programming languages | |
| Language support | |
|---|---|
| Software PicoLog PicoScope 6 | Full support for English, French and German; menus only for Italian, Spanish and Swedish Full support for: English, Français, Deutsch, Italiano, Español Menus and dialogs only for: 中文 (简体), 正體中文 (繁體), Čeština, Dansk, suomi, Ελληνικά, Magyar, 日本語, Norsk, Polski, Português, română, Русский, Svenska, Türkçe |
| Documentation User’s guide Installation guide | English, Français, Deutsch, Español English, Français, Deutsch, Italiano, Español |
| General | |
|---|---|
| Additional hardware (supplied) | USB 2.0 cable, user manuals, software CD–ROM |
| PC interface | USB 2.0 (USB 1.1 compatible) - cable supplied |
| Power requirements | Powered from USB port |
| Compliance | FCC, CE |
| Total Satisfaction Guarantee | In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. |
| Warranty | 5 years |
Note: quoted specifications apply when using PicoScope 6 software.
Share