Discontinued Products: PicoScope 2202

PicoScope 2202

This product has now been discontinued.
Listed here are the final specifications for the PicoScope 2202.

View our USB Oscilloscopes, Data Acquisition and Vehicle Diagnostics products to see our current range of PC-based test and measurement equipment.

            Oscilloscope 
   Bandwidth 2 MHz 
 Channels 2 
 Vertical resolution 8 bits 
 Enhanced vertical resolution 12 bits 
 Dynamic range 48 dB 
 Accuracy ±3% 
 Input ranges (full scale) ±50 mV to ±20 V 
 Input characteristics 1 MΩ in parallel with 20 pF 
 Overload protection  ±100 V (signal input) 
 Input type Single-ended, BNC connector 
 Input coupling Software selectable AC/DC 
 Maximum sampling rate (single shot)
 One channel in use
 Two channels in use 
20 MS/s (single channel)
 10 MS/s (dual channel) 
 Buffer memory 32 kS 
 Waveform buffer Up to 1000 waveforms 
            Environmental 
   Operating environment
Temperature
Humidity 
+20 °C to +30 °C for quoted accuracy, 0 °C to +70 °C overall.
20 to 90% RH 
            Physical Dimensions 
   Dimensions 140 x 190 x 45 mm   (5.51 x 7.48 x 1.77 in) 
              PC Requirements 
   Minimum  Processor: Pentium II processor, or equivalent
 Memory: 64 MB (XP) / 512 MB (Vista) minimum
 Operating system: Microsoft Windows XP SP2 (32-bit) or Vista (32 or 64-bit)
 Ports: USB 1.1 compliant port  
 Recommended Processor: 2 GHz Pentium IV processor, or equivalent
 Memory: 256 MB (XP) / 1 GB (Vista)
 Operating system: Microsoft Windows XP SP2 (32-bit) or Vista (32 or 64-bit)
 Ports: USB 2.0 compliant port  
               Software 
   PicoScope 6 for Windows  PicoScope 6 is your complete test and measurement lab in one application. 
Features include:

Capture modes - oscilloscope, spectrum and persistence modes

Channel maths - calculate the sum, difference, product, inverse or
create your own custom function using standard arithmetic, exponential and trigonometric functions

Automated measurements
Scope mode: AC RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak-to-peak, rise time and rising rate

Spectrum mode: frequency at peak, amplitude at peak, total power, total harmonic distortion (THD), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD)

Export data formats - Comma separated values (CSV), tab delimited  (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT)

Full details on PicoScope 6  
 PicoLog for Windows  PicoLog data acqusition software can collect up to 1 million samples. Features include:

Multiple views - view data as a graph, spreadsheet or text
 
Parameter scaling - convert raw data into standard engineering units

Math functions - use mathematical equations to calculate additional parameters

Alarm limits - program an alert if a parameter goes out of a specified range

IP networking - transfer measurements via a LAN or over the Internet

Full details on PicoLog  
 Linux drivers 32-bit and 64-bit 
 Software development kit A growing collection of drivers and example code for various programming languages 
                Language support 
    Software
 PicoLog

 PicoScope 6 
Full support for English, French and German; menus only for Italian, Spanish and Swedish 
 Full support for English, French, Italian, German and Spanish.  Menus and dialogs only for Dutch, Hungarian and Simplified
Chinese.  
 Documentation
 User’s guide
 Programmer’s guide
 Installation guide   
English 
English 
English, French, German, Italian, Spanish  
              General 
    Additional hardware (supplied) USB 2.0 cable, user manuals, software CD-ROM 
 PC interface USB 2.0 (USB 1.1 compatible) - cable supplied 
 Power requirements Powered from USB port 
 Compliance FCC, CE 
 Total Satisfaction Guarantee In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days. 
 Warranty 2 years 
  

Oscilloscope
Bandwidth	2 MHz
Channels	2
Vertical resolution	8 bits
Enhanced vertical resolution	12 bits
Dynamic range	48 dB
Accuracy	±3%
Input ranges (full scale)	±50 mV to ±20 V
Input characteristics	1 MΩ in parallel with 20 pF
Overload protection	±100 V (signal input)
Input type	Single-ended, BNC connector
Input coupling	Software selectable AC/DC
Maximum sampling rate (single shot) One channel in use Two channels in use	20 MS/s (single channel) 10 MS/s (dual channel)
Buffer memory	32 kS
Waveform buffer	Up to 1000 waveforms

Environmental
Operating environment Temperature Humidity	+20 °C to +30 °C for quoted accuracy, 0 °C to +70 °C overall. 20 to 90% RH

Physical Dimensions
Dimensions	140 x 190 x 45 mm (5.51 x 7.48 x 1.77 in)

PC Requirements
Minimum	Processor: Pentium II processor, or equivalent Memory: 64 MB (XP) / 512 MB (Vista) minimum Operating system: Microsoft Windows XP SP2 (32-bit) or Vista (32 or 64-bit) Ports: USB 1.1 compliant port
Recommended	Processor: 2 GHz Pentium IV processor, or equivalent Memory: 256 MB (XP) / 1 GB (Vista) Operating system: Microsoft Windows XP SP2 (32-bit) or Vista (32 or 64-bit) Ports: USB 2.0 compliant port

Software
PicoScope 6 for Windows	PicoScope 6 is your complete test and measurement lab in one application. Features include: Capture modes - oscilloscope, spectrum and persistence modes Channel maths - calculate the sum, difference, product, inverse or create your own custom function using standard arithmetic, exponential and trigonometric functions Automated measurements Scope mode: AC RMS, cycle time, DC average, duty cycle, falling rate, fall time, frequency, high pulse width, low pulse width, maximum, minimum, peak-to-peak, rise time and rising rate Spectrum mode: frequency at peak, amplitude at peak, total power, total harmonic distortion (THD), total harmonic distortion plus noise (THD+N), spurious-free dynamic range (SFDR), signal+noise+distortion to signal+noise ratio (SINAD), signal to noise ratio (SNR) and intermodulation distortion (IMD) Export data formats - Comma separated values (CSV), tab delimited (TXT), windows bitmap (BMP), graphics interchange format (GIF), portable network graphics (PNG), MATLAB 4 format (MAT) Full details on PicoScope 6
PicoLog for Windows	PicoLog data acqusition software can collect up to 1 million samples. Features include: Multiple views - view data as a graph, spreadsheet or text Parameter scaling - convert raw data into standard engineering units Math functions - use mathematical equations to calculate additional parameters Alarm limits - program an alert if a parameter goes out of a specified range IP networking - transfer measurements via a LAN or over the Internet Full details on PicoLog
Linux drivers	32-bit and 64-bit
Software development kit	A growing collection of drivers and example code for various programming languages

Language support
Software PicoLog PicoScope 6	Full support for English, French and German; menus only for Italian, Spanish and Swedish Full support for English, French, Italian, German and Spanish. Menus and dialogs only for Dutch, Hungarian and Simplified Chinese.
Documentation User’s guide Programmer’s guide Installation guide	English English English, French, German, Italian, Spanish

General
Additional hardware (supplied)	USB 2.0 cable, user manuals, software CD-ROM
PC interface	USB 2.0 (USB 1.1 compatible) - cable supplied
Power requirements	Powered from USB port
Compliance	FCC, CE
Total Satisfaction Guarantee	In the event that this product does not fully meet your requirements you can return it for an exchange or refund. To claim, the product must be returned in good condition within 14 days.
Warranty	2 years

Note: quoted specifications apply when using PicoScope 6 software.

Current products

< More discontinued products

Pico Technology

Discontinued Products

PicoScope 2202

Current products