CartADC-216
This product has now been discontinued.
Listed here are the final specifications for the ADC-216.
View our USB Oscilloscopes, Data Acquisition and Vehicle Diagnostics products to see our current range of PC-based test and measurement equipment.
| ADC-216 Specifications | |
|---|---|
| Channels | 2x BNC + 1 external trigger |
| Analog bandwidth | 166 KHz |
| Sampling rate | 333 kS/s |
| Sampling rate (dual channel) | 166 kS/s |
| Resolution | 16 bit |
| Buffer size | 32 kB |
| Dynamic range | 96 dB |
| Scope timebases | 20 µs/div to 50 s/div |
| Spectrum ranges | 0 to 166 kHz |
| FFT points | 128 (fastest) to 4096 (accurate) |
| Windows | Rectangle, Triangle, Gaussian, Hamming, Blackman, Parzen, Hanning |
| Trigger modes | Free run, Auto, Repeat & Single |
| Pre/ post trigger | ±100 % |
| Voltage ranges | ±10 mV to ±20 V in 11 ranges |
| Overload protection | ±100 V |
| Input impedance | 1 MΩ |
| Coupling | AC, DC |
| Accuracy | ±1 % |
| Power supply | 500 mA @ 12 V (mains adaptor supplied) |
| Output connector | D25 to PC parallel port (cable supplied) |
| Dimension | 140 x 190 x 45 mm (5.51 x 7.48 x 1.77 in) |
| Supplied software | PicoScope (oscilloscope, spectrum analyser, meter), PicoLog (data logger), Software Development Kit, Linux drivers. Software is supplied on CD and is compatible with 32-bit editions of Windows XP (SP2) and Vista. |
Share