CartADC-212/50 and ADC-212/100
This product has now been discontinued.
Listed here are the final specifications for the ADC-212/50 and ADC-212/100.
View our USB Oscilloscopes, Data Acquisition and Vehicle Diagnostics products to see our current range of PC–based test and measurement equipment.
| ADC-212/50 | ADC-212/100 | |
|---|---|---|
| Channels | 2 x BNC + 1 external trigger | |
| Analog bandwidth | 25 MHz | 50 MHz |
| Sampling rate (single channel) | 50 MS/s | 100 MS/s |
| Sampling rate (dual channel) | 50 MS/s | |
| Sampling rate (repetitive signals) | 5 GS/s** | |
| Resolution | 12 bit | |
| Buffer memory | 128 kS | |
| Dynamic range | 80 dB | |
| Scope timebases | 100 ns/div to 50 s/div | |
| Spectrum ranges | 0 to 25 MHz | 0 to 50 MHz |
| Trigger modes | Free run, Auto, Repeat & Single | |
| Pre/ post trigger | ±100 % | |
| Voltage ranges | ±50 mV to ±20 V in nine ranges | |
| Overload protection | ±100 V | |
| Input impedance | 1 MΩ | |
| Coupling | AC, DC | |
| Accuracy | ± 1% | |
| Power supply | 500 mA @ 12 V (mains adaptor supplied) | |
| Output connector | D25 to PC parallel port (cable supplied) | |
| Dimension | 140 x 190 x 45 mm (5.51 x 7.48 x 1.77 in) | |
| Supplied software | PicoScope (oscilloscope, spectrum analyser, meter), PicoLog (data logger) and a Software Development Kit. Software is supplied on CD and is compatible with 32–bit editions of Windows XP and Vista. | |
** 5 GS/s equivalent time sampling for repetitive signals is supported by PicoScope R5.08.0 and later, if you have an earlier version please visit the download section of our website for a free upgrade.
Share