Pico Technology

All our products are tested to ensure they meet their specifications. This means that you can be confident that all measurements you make with your Pico product will be within the accuracy that we specify.

If you plan to use your product in an industrial or scientific environment where it is necessary to have documented traceability, or you just want your Pico product to be ‘fine–tuned’ to give the best possible performance, then for most of our products we can provide you with a calibration service referenced to National Standards. This means that you will be given documented proof of the accuracy of your Pico product at the time it is despatched to you. This documented proof is in the form of a calibration certificate that has the errors recorded, for example: the product may have a published accuracy of ±3%, after calibration the error might be -1%. You can then allow for this -1% error when taking measurements.

If you purchase your Pico product online then, if calibration is available, you will be given the opportunity to purchase calibration at the same time. Delivery of calibrated products will usually be within three working days, but you should allow up to ten working days. A delivery charge will be incurred if the unit is returned to us for calibration. Alternatively, we can supply a certificate of conformity for £20, provided this is requested on the order.

For best accuracy, we suggest that a calibrated product is re–calibrated yearly.

You are free to get your Pico product calibrated by any accredited calibration provider.

If you require any further information, or wish to return an existing product for calibration then please contact our support team.